Square & Rectangular Steel Tube (HSS), 15×15 to 400×400
Cold-formed square and rectangular hollow sections from 15×15 mm to 400×400 mm, wall thickness 1.0 mm to 20 mm, in Q195, Q235B and A500 Gr.B. Supplied in 6 m and 12 m lengths to GB/T 6728 with mill test certificate and weld inspection record.
Product Overview
Square and rectangular tube — known internationally as hollow structural section or HSS, and in the trade as box section — is made by cold forming steel strip into a round shape, welding the seam by high-frequency ERW, then sizing and squaring the section through rolls. The closed profile puts material around the perimeter of the section, so it carries bending and compression efficiently in every direction, and its flat faces make welded, bolted and drilled connections straightforward.
We supply three material families. Q195 is the economical choice for light frames, furniture and general fabrication; Q235B is the standard structural grade used for building frames, racking and machinery; and A500 Gr.B corresponds to the ASTM hollow section specification used throughout North America, with the higher yield strength that goes with it. Sections run from 15×15 mm up to 400×400 mm square, with rectangular sections including 200×400 mm, and wall thicknesses from 1.0 mm to 20 mm.
Standard lengths are 6 m and 12 m, supplied plain cut or with the ends deburred, and the bore can be left plain or given a light oil film for humid routes. Every bundle ships with an EN 10204 3.1 mill test certificate, and weld inspection records are available for structural orders.

Specifications & Size Range
Common square and rectangular sections grouped by size band. Production covers 15×15 mm to 400×400 mm square and rectangular sections to 400 mm on the long side, in wall thicknesses from 1.0 mm to 20 mm. Cut-to-length, mitred and punched tube is available on request.
| Section type | Common sizes (mm) | Wall thickness (mm) | Standard length | Typical use |
|---|---|---|---|---|
| Square tube | 15×15, 20×20, 25×25, 30×30, 40×40, 50×50 | 1.0 – 5.0 | 6 m / 12 m | Furniture, gates, greenhouses, light machine frames, trolleys |
| Square tube | 60×60, 70×70, 80×80, 100×100 | 2.0 – 6.0 | 6 m / 12 m | Columns, roof purlins, steel structure, curtain-wall framing |
| Square tube | 120×120, 150×150, 180×180, 200×200 | 3.0 – 12 | 6 m / 12 m, cut to order | Portal frames, crane rails, hoardings, heavy storage racks |
| Rectangular tube | 20×40, 20×50, 20×80, 40×60, 50×100 | 1.5 – 5.0 | 6 m / 12 m | Trusses, mezzanine joists, trailer and vehicle body frames |
| Rectangular tube | 100×150, 100×200, 150×300, 200×400 | 3.0 – 12 | 6 m / 12 m, cut to order | Long-span beams, machine bases, gantry legs, deck framing |
Tolerances
Dimensions, shape, corner radius and mass follow GB/T 6728 for cold-formed hollow sections, and A500 Gr.B orders are produced and reported against ASTM A500. Out-of-square is controlled at the tube ends, wall thickness is measured on the flat faces clear of the weld, and the section is supplied straight within the standard limit. Weld quality is verified by flattening, bend or ultrasonic testing as the order requires.
Available Sizes — Detailed Specification Pages
Every size below has its own page with the full theoretical weight table, tolerances, grade data, applications and delivery options.
| Size | Wall thickness (mm) | Specification page |
|---|---|---|
| 25 × 25 mm | 1.2 – 2.0 | Weight & specification |
| 40 × 40 mm | 1.5 – 3.0 | Weight & specification |
| 50 × 50 mm | 1.5 – 4.0 | Weight & specification |
| 60 × 60 mm | 2.0 – 4.0 | Weight & specification |
| 80 × 80 mm | 2.5 – 5.0 | Weight & specification |
| 100 × 100 mm | 3.0 – 6.0 | Weight & specification |
Steel Grades & International Equivalents
All grades below are supplied with a mill test certificate. The right-hand column shows the material type and the Chinese standard the grade is produced to; the middle columns give the nearest recognised equivalent in other national standards. Exact equivalence for a specific project should be confirmed on the enquiry.
| GB (China) | ASTM / AISI (US) | EN (Europe) | JIS (Japan) | DIN (Germany) | Type / Standard |
|---|---|---|---|---|---|
| Q355B hollow section | A500 Gr.B / A500 Gr.C | EN 10219 S355J2H | STKR400 | St52-3 | Cold-formed hollow structural section (HSS) (GB/T 6728) |
| Q235B welded pipe | A53 Gr.B / A500 Gr.B | EN 10219 S235JRH | STK400 (JIS G3444) | St37-2 | Welded steel pipe (ERW / LSAW) (GB/T 3091) |
| Q195 welded pipe | A53 Gr.A / A500 | EN 10255 (S195T) | SGP (JIS G3452) | St33 | Welded steel pipe (ERW) (GB/T 3091) |
Grade Notes
- Q355B hollow section — Square / rectangular / round hollow sections for steel structures, racks, trailers and machinery frames.
- Q235B welded pipe — Structural welded pipe for scaffolding, piling, water mains and building frames.
- Q195 welded pipe — General-purpose welded pipe for water, gas, heating and structural framing.
Chemical Composition (%, ladle analysis)
Typical specification limits. Actual heat values are reported on the mill test certificate supplied with every shipment.
| Grade | C | Si | Mn | P max | S max | Other elements |
|---|---|---|---|---|---|---|
| Q355B hollow section | ≤0.24 | ≤0.55 | ≤1.60 | ≤0.035 | ≤0.035 | — |
| Q235B welded pipe | ≤0.20 | ≤0.35 | ≤1.40 | ≤0.045 | ≤0.045 | — |
| Q195 welded pipe | ≤0.12 | ≤0.30 | 0.25–0.50 | ≤0.035 | ≤0.040 | — |
Mechanical Properties
Minimum values at room temperature unless stated. ReL = yield strength; Rp0.2 = 0.2% proof stress; Rm = tensile strength; A = elongation after fracture.
| Grade | Yield (ReL) | Proof (Rp0.2) | Tensile (Rm) | Elongation A | Impact / others | |
|---|---|---|---|---|---|---|
| Q355B hollow section | ≥355 MPa | — | ≥470 MPa | ≥20% | — | — |
| Q235B welded pipe | ≥235 MPa | — | 370–500 MPa | ≥26% | — | Test Pressure hydro-tested per spec |
| Q195 welded pipe | ≥195 MPa | — | 315–430 MPa | ≥33% | — | Test Pressure hydro-tested per spec |

Standards & Documents
- GB/T 6728 — cold-formed hollow steel sections for general structure and mechanical service
- ASTM A500 Gr.B / Gr.C — cold-formed welded carbon steel structural tubing, on request
- EN 10219 S235JRH / S355J2H — cold-formed welded structural hollow sections, European equivalent
- GB/T 700 (Q195, Q235B) and GB/T 1591 (Q355B) — base strip grades
- JIS G3466 / JIS G3444 — Japanese hollow section specifications where called for
- Testing: weld flattening or bend test, dimensional check, EN 10204 3.1 mill test certificate
Typical Applications
| Industry / Application | Typical use |
|---|---|
| Building & factory structures | Columns, rafters, purlins, roof and wall bracing and mezzanine members, where the closed section gives good stiffness for its weight. |
| Curtain wall & facade framing | Mullion and transom framing, exposed and hidden support frames and decorative profiles in glass, stone and aluminium facades. |
| Machinery & equipment frames | Machine bases, guard frames, conveyor supports, production line framing and robot cells where flat faces simplify mounting. |
| Storage racking & shelving | Rack uprights and beams, work benches, pallet support frames and shelving systems. |
| Trailers & vehicle bodies | Chassis and body framing for trailers, trucks, buses, caravans and agricultural equipment. |
| Fencing, gates & railings | Gate frames, fence posts, railing and handrail frames, balustrade supports and security frames. |
| Infrastructure & support work | Road sign frames, cable and pipe supports, drainage structures and general municipal steelwork. |
Common Problems Buyers Face — and How We Prevent Them
These are the issues that most often cause claims on steel imports. Each one is controlled in our process before shipment.
Weld seam shows lack of penetration, or a bead that will not take paint evenly
Why it happens: Strip surface condition, welding power drift or misaligned rolls along a long production run will all show up as a seam defect that is invisible in a bundle.
Our control: Welding parameters are fixed for each strip coil and recorded per lot, and seams are checked by flattening or bend test through the run. For structural work we can supply ultrasonic inspection of the seam, and the inspection record travels with the shipment.
Tube arrives twisted or out of square at the ends
Why it happens: Cold-formed tube that is not properly sized after welding, or that is stacked too high, holds a twist, and the error only becomes visible when the frame is assembled.
Our control: Twist and end squareness are measured after sizing and before packing, and bundles are stacked and strapped so the section is not crushed in storage or in the container. Where a frame is dimensionally critical, order cut-to-length members and state the squareness requirement on the enquiry.
Rust inside the closed section
Why it happens: The bore of the tube is not accessible for inspection or painting, and condensation inside a sealed section during a long sea voyage can start corrosion that shows later as staining at the drilled holes.
Our control: Tube for humid routes is shipped dry, and a light oil film can be applied to the bore on request. When you drill or weld the section, allow the bore to drain and ventilate, and where a fully sealed element is unavoidable, specify the tube hot-dip galvanized so both surfaces are coated.
Thin wall tube denting under handling or during welding
Why it happens: Sections with a high width-to-thickness ratio deform easily, and a sling or a clamp point will set a permanent dent that cannot be straightened.
Our control: Tell us the handling and welding method on the enquiry. For very thin walls we recommend lifting with belt slings or spreader bars, and where the member must resist local crushing at a connection we will propose a thicker wall or an insert plate rather than leave you to discover the limit on site.
Grade supplied does not match the structural design
Why it happens: Q195, Q235B and A500 Gr.B look identical in bundle form, and a substitution changes the capacity of the frame without any visible difference.
Our control: The grade is tagged on every bundle and proven on the mill certificate for the heat concerned. Where the design depends on a specific yield strength, state it on the order so the material and the certificate are matched to the calculation, not to what happened to be available.

Our Supply & Manufacturing Advantages
- Square range up to 400×400 — Sections from 15×15 mm to 400×400 mm square and rectangular sections to 400 mm on the long side, from one supplier and one certificate chain.
- Three specifications in one order — Chinese Q195 and Q235B, plus ASTM A500 Gr.B, so a project can be built to a local design standard without changing supplier.
- Weld quality verified — Seam integrity checked by flattening or bend test through the production run, with ultrasonic inspection available for structural orders.
- Cut, mitred and punched — Members cut to length, mitred for corner joints or punched to the fabrication drawing before packing, so the tube arrives ready to assemble.
- Closed section efficiency — High bending and torsional stiffness for the weight, which reduces steel tonnage compared with an equivalent open section.
- Export packaging as standard — Square-stacked and steel-strapped bundles sized to the container, with end protection so the corners and cut ends survive handling.
Packaging, Delivery & Payment
- Packing: loose in bulk vessel, or bundled and containerised to your requirement. Galvanized and coated products get VCI paper, waterproof wrapping and edge protection. See our export packaging methods.
- Availability: both stock and custom production. Tell us the specification and we will confirm the route.
- MOQ: no strict minimum — one ton can ship.
- Lead time: stock dispatched to port within 3 days; orders needing export packaging about 1 week; custom production quoted per product.
- Payment: stock — 10% deposit, balance before shipment; custom production — 50% deposit, balance before shipment.
- Documents: EN 10204 3.1 mill test certificate with every shipment; third-party inspection (SGS / BV) on request.
Frequently Asked Questions
What is the difference between Q235B tube and ASTM A500 Gr.B tube?
Q235B is produced to GB/T 700 and GB/T 6728 with a specified minimum yield of 235 MPa, while A500 Gr.B is an ASTM cold-formed hollow section specification with a higher specified minimum yield, generally 290 MPa for the common size ranges. The two look identical but are not interchangeable in a structure designed to A500. Tell us which specification governs the design and we will supply and certify to that standard.
Should I choose square or rectangular tube?
Square tube carries load almost equally in both directions and is the natural choice for columns, posts and frames loaded in more than one plane. Rectangular tube puts more material into the direction that matters and is more efficient for a beam or a joist spanning in one direction. For a member loaded mainly in one plane, a rectangular section is usually lighter and cheaper for the duty.
What wall thickness should I specify?
Wall thickness is set by the load and by the connection, not by the outside size. Thin walls are efficient in bending but crush locally at bolted and welded connections, so for a bolted joint the governing figure is often the wall thickness needed to develop the bolt rather than the stress in the member. Send the span, load and connection type and we will propose a section.
Does the tube comply with EN 10219?
We can supply hollow sections produced to meet EN 10219 S235JRH and S355J2H, the European equivalents for cold-formed welded structural hollow sections, and report the chemical and mechanical properties against that standard. Say at the enquiry that EN 10219 governs and the certificate will be issued accordingly.
What is the difference between square tube and seamless square tube?
Standard square tube is formed from strip and has a weld seam running along one face, which is inspected and is not a weakness in normal structural service. Seamless square tube is made from a seamless round pipe that is reshaped into a square section, so it has no weld seam at all and is chosen for pressure, fatigue and precision applications rather than for ordinary structures.
Who supplies square and rectangular steel tube from China for export?
We do. Dayang supplies square and rectangular hollow sections to steel stockists, frame manufacturers, racking producers and contractors worldwide, in Q195, Q235B and A500 Gr.B, cut to length or punched to drawing, with mill test certificates and export packing. Send the section list and the standard required for a quotation.
Do you have a minimum order quantity?
No strict minimum and one ton can ship, which makes a trial order practical. Because hollow sections are usually loaded as mixed-size bundles, consolidating several sections into one container normally improves the freight cost per ton, and we will point out the break points when we quote.
What documents are supplied with a tube shipment?
An EN 10204 3.1 mill test certificate showing heat number, chemical composition and mechanical properties, weld inspection records where specified, and the commercial invoice, packing list and certificate of origin. Third-party inspection by SGS or BV can be arranged before loading.
How is tube packed for container loading?
Bundles are square-stacked, steel-strapped and sized so that the load fills the container efficiently, with end protection and spacers to prevent scuffing and moisture build-up. Long lengths are loaded to your requested length, and cut-to-length orders are packed in the sequence of the cutting list where possible.
Request a Quotation Export Packaging
Live Stock & Indicative Price
The table below lists live stock at the time of publication, with indicative EXW China reference prices in USD per tonne (converted at 6.70 CNY/USD). Steel prices move with the mill market every week — send us your size, quantity and destination and we will confirm availability and issue a firm FOB or CIF quotation.
| Product | Size / Model | Grade | Price (USD/t, EXW) | Stock (t) |
|---|---|---|---|---|
| Square / Rectangular Tube | 20 × 20 × 1.5 mm | Q235B | $536 | 196 |
| Square / Rectangular Tube | 20 × 20 × 1.7 mm | Q235B | $525 | 144 |
| Square / Rectangular Tube | 20 × 20 × 2 mm | Q235B | $518 | 225 |
| Square / Rectangular Tube | 20 × 20 × 2.5 mm | Q235B | $533 | 225 |
| Square / Rectangular Tube | 20 × 20 × 2.75 mm | Q235B | $533 | 225 |
| Square / Rectangular Tube | 20 × 30 × 1.5 mm | Q235B | $534 | 150 |
| Square / Rectangular Tube | 20 × 30 × 1.7 mm | Q235B | $522 | 150 |
| Square / Rectangular Tube | 20 × 30 × 1.8 mm | Q235B | $522 | 150 |
| Square / Rectangular Tube | 20 × 30 × 2 mm | Q235B | $518 | 150 |
| Square / Rectangular Tube | 20 × 30 × 2.2 mm | Q235B | $512 | 150 |
| Square / Rectangular Tube | 20 × 30 × 2.5 mm | Q235B | $506 | 150 |
| Square / Rectangular Tube | 20 × 30 × 2.75 mm | Q235B | $506 | 150 |
| Square / Rectangular Tube | 20 × 30 × 3 mm | Q235B | $513 | 120 |
| Square / Rectangular Tube | 20 × 40 × 1.5 mm | Q235B | $531 | 120 |
| Square / Rectangular Tube | 20 × 40 × 1.7 mm | Q235B | $522 | 120 |
| Square / Rectangular Tube | 20 × 40 × 1.8 mm | Q235B | $522 | 120 |
| Square / Rectangular Tube | 20 × 40 × 2 mm | Q235B | $516 | 120 |
| Square / Rectangular Tube | 20 × 40 × 2.2 mm | Q235B | $510 | 120 |
| Square / Rectangular Tube | 20 × 40 × 2.5 mm | Q235B | $506 | 120 |
| Square / Rectangular Tube | 20 × 40 × 2.75 mm | Q235B | $506 | 120 |
| Square / Rectangular Tube | 20 × 40 × 3 mm | Q235B | $506 | 120 |
| Square / Rectangular Tube | 25 × 25 × 1.5 mm | Q235B | $530 | 144 |
| Square / Rectangular Tube | 25 × 25 × 1.7 mm | Q235B | $522 | 144 |
| Square / Rectangular Tube | 25 × 25 × 2 mm | Q235B | $518 | 144 |
| Square / Rectangular Tube | 25 × 25 × 2.5 mm | Q235B | $507 | 144 |
| Square / Rectangular Tube | 25 × 25 × 2.75 mm | Q235B | $507 | 144 |
| Square / Rectangular Tube | 25 × 25 × 3 mm | Q235B | $507 | 144 |
| Square / Rectangular Tube | 25 × 50 × 1.5 mm | Q235B | $519 | 128 |
| Square / Rectangular Tube | 25 × 50 × 1.7 mm | Q235B | $516 | 128 |
| Square / Rectangular Tube | 25 × 50 × 1.8 mm | Q235B | $516 | 128 |
| Square / Rectangular Tube | 25 × 50 × 2 mm | Q235B | $510 | 128 |
| Square / Rectangular Tube | 25 × 50 × 2.5 mm | Q235B | $503 | 128 |
| Square / Rectangular Tube | 25 × 50 × 2.75 mm | Q235B | $503 | 128 |
| Square / Rectangular Tube | 25 × 50 × 3 mm | Q235B | $503 | 128 |
| Square / Rectangular Tube | 30 × 30 × 1.5 mm | Q235B | $530 | 100 |
| Square / Rectangular Tube | 30 × 30 × 1.7 mm | Q235B | $521 | 100 |
| Square / Rectangular Tube | 30 × 30 × 1.8 mm | Q235B | $516 | 100 |
| Square / Rectangular Tube | 30 × 30 × 2 mm | Q235B | $516 | 100 |
| Square / Rectangular Tube | 30 × 30 × 2.2 mm | Q235B | $513 | 100 |
| Square / Rectangular Tube | 30 × 30 × 2.5 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 30 × 30 × 2.75 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 30 × 30 × 3 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 30 × 30 × 3.5 mm | Q235B | $518 | 100 |
| Square / Rectangular Tube | 30 × 30 × 3.75 mm | Q235B | $518 | 100 |
| Square / Rectangular Tube | 30 × 40 × 1.5 mm | Q235B | $527 | 130 |
| Square / Rectangular Tube | 30 × 40 × 1.7 mm | Q235B | $518 | 120 |
| Square / Rectangular Tube | 30 × 40 × 1.8 mm | Q235B | $518 | 120 |
| Square / Rectangular Tube | 30 × 40 × 2 mm | Q235B | $512 | 130 |
| Square / Rectangular Tube | 30 × 40 × 2.2 mm | Q235B | $513 | 130 |
| Square / Rectangular Tube | 30 × 40 × 2.5 mm | Q235B | $504 | 130 |
| Square / Rectangular Tube | 30 × 40 × 2.75 mm | Q235B | $504 | 130 |
| Square / Rectangular Tube | 30 × 40 × 3 mm | Q235B | $504 | 130 |
| Square / Rectangular Tube | 30 × 40 × 3.5 mm | Q235B | $519 | 130 |
| Square / Rectangular Tube | 30 × 40 × 3.75 mm | Q235B | $519 | 130 |
| Square / Rectangular Tube | 30 × 50 × 1.5 mm | Q235B | $518 | 104 |
| Square / Rectangular Tube | 30 × 50 × 1.7 mm | Q235B | $507 | 104 |
| Square / Rectangular Tube | 30 × 50 × 1.8 mm | Q235B | $506 | 104 |
| Square / Rectangular Tube | 30 × 50 × 2 mm | Q235B | $503 | 104 |
| Square / Rectangular Tube | 30 × 50 × 2.2 mm | Q235B | $504 | 104 |
| Square / Rectangular Tube | 30 × 50 × 2.5 mm | Q235B | $496 | 104 |
| Square / Rectangular Tube | 30 × 50 × 2.75 mm | Q235B | $496 | 104 |
| Square / Rectangular Tube | 30 × 50 × 3 mm | Q235B | $496 | 104 |
| Square / Rectangular Tube | 30 × 50 × 3.5 mm | Q235B | $496 | 104 |
| Square / Rectangular Tube | 30 × 50 × 3.75 mm | Q235B | $496 | 104 |
| Square / Rectangular Tube | 30 × 60 × 1.5 mm | Q235B | $519 | 98 |
| Square / Rectangular Tube | 30 × 60 × 1.7 mm | Q235B | $512 | 98 |
| Square / Rectangular Tube | 30 × 60 × 2 mm | Q235B | $504 | 91 |
| Square / Rectangular Tube | 30 × 60 × 2.5 mm | Q235B | $496 | 84 |
| Square / Rectangular Tube | 30 × 60 × 2.75 mm | Q235B | $496 | 84 |
| Square / Rectangular Tube | 30 × 60 × 3 mm | Q235B | $496 | 84 |
| Square / Rectangular Tube | 30 × 60 × 3.5 mm | Q235B | $496 | 98 |
| Square / Rectangular Tube | 30 × 60 × 3.75 mm | Q235B | $496 | 98 |
| Square / Rectangular Tube | 40 × 40 × 1.5 mm | Q235B | $516 | 100 |
| Square / Rectangular Tube | 40 × 40 × 1.7 mm | Q235B | $509 | 100 |
| Square / Rectangular Tube | 40 × 40 × 1.8 mm | Q235B | $506 | 100 |
| Square / Rectangular Tube | 40 × 40 × 2 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 40 × 40 × 2.2 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 40 × 40 × 2.5 mm | Q235B | $496 | 100 |
| Square / Rectangular Tube | 40 × 40 × 2.75 mm | Q235B | $496 | 100 |
| Square / Rectangular Tube | 40 × 40 × 3 mm | Q235B | $496 | 100 |
| Square / Rectangular Tube | 40 × 40 × 3.5 mm | Q235B | $496 | 100 |
| Square / Rectangular Tube | 40 × 40 × 3.75 mm | Q235B | $496 | 100 |
| Square / Rectangular Tube | 40 × 40 × 4.5 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 40 × 40 × 4.75 mm | Q235B | $503 | 100 |
| Square / Rectangular Tube | 40 × 60 × 1.5 mm | Q235B | $516 | 70 |
| Square / Rectangular Tube | 40 × 60 × 1.7 mm | Q235B | $507 | 70 |
| Square / Rectangular Tube | 40 × 60 × 1.8 mm | Q235B | $509 | 70 |
| Square / Rectangular Tube | 40 × 60 × 2 mm | Q235B | $503 | 70 |
| Square / Rectangular Tube | 40 × 60 × 2.2 mm | Q235B | $503 | 70 |
| Square / Rectangular Tube | 40 × 60 × 2.5 mm | Q235B | $496 | 70 |
| Square / Rectangular Tube | 40 × 60 × 2.75 mm | Q235B | $496 | 70 |
| Square / Rectangular Tube | 40 × 60 × 3 mm | Q235B | $496 | 70 |
| Square / Rectangular Tube | 40 × 60 × 3.5 mm | Q235B | $496 | 70 |
| Square / Rectangular Tube | 40 × 60 × 3.75 mm | Q235B | $496 | 70 |
| Square / Rectangular Tube | 40 × 60 × 4.5 mm | Q235B | $501 | 70 |
| Square / Rectangular Tube | 40 × 60 × 4.75 mm | Q235B | $501 | 70 |
| Square / Rectangular Tube | 40 × 60 × 5.5 mm | Q235B | $509 | 70 |
| Square / Rectangular Tube | 40 × 60 × 5.75 mm | Q235B | $509 | 70 |
| Square / Rectangular Tube | 40 × 80 × 1.5 mm | Q235B | $516 | 50 |
| Square / Rectangular Tube | 40 × 80 × 1.7 mm | Q235B | $507 | 50 |
Showing 100 of 555 listed sizes (lowest prices first). Price range USD 496–536 per tonne (EXW China). MOQ from 1 tonne; stock dispatched to port within 3 days. Mill test certificate (EN 10204 3.1) and third-party inspection available on request.