Channel Steel (U-Channel) 5# – 40# | Q235B, Q355B, SS400

Hot-rolled channel steel — also called U-channel or C-channel — in Q235B, Q355B and SS400, from 5# up to 40#, in both the a (standard web) and b (thicker web) versions. Standard lengths 6 m, 9 m and 12 m, cut to your cutting list, with a mill test certificate for every heat.

Product Overview

Channel steel is a hot-rolled structural section with a channel or U-shaped cross section: a central web with two flanges turned up on the same side. That shape gives it most of the bending efficiency of an I-beam at a lower weight per metre, and it also gives a flat back and two flat flange faces that are convenient to bolt to — which is why it is standard for purlins, framing, vehicle chassis and equipment supports.

The Chinese designation is by web height in centimetres, so 16# means a nominal web height of 160 mm. Each height is rolled in an a and a b version: the b version has a thicker web and wider flanges and therefore a higher section modulus, so where the a section is marginal on strength or deflection, the b section of the same height will usually solve it without going up a size.

Stock runs from 5# to 40# in Q235B (GB/T 700), Q355B (GB/T 1591) and SS400 (JIS G3101), supplied in 6 m, 9 m and 12 m lengths or cut to your cutting list. Hot-dip galvanized channel and higher-strength manganese channel are also available if the structure is exposed or the load is heavy.

Channel Steel supplied from China - live stock ready for export
Ready stock of Channel Steel at our yard, prepared for export.

Specifications & Size Range

Standard channel range with the a and b designations. Mill lengths are 6 m, 9 m and 12 m; cut-to-length, notching and drilling are available. Both the standard-web a version and the heavy-web b version are produced in each height.

Size group Designations Web height (mm) Standard length Typical use
Light channel 5#, 6.3#, 8#, 10#, 12# 50 – 120 6 m Purlins, framing, light supports, brackets, trolley rails
Medium channel 14#, 16#, 18#, 20# 140 – 200 6 m / 9 m / 12 m Building columns and beams, equipment frames, vehicle chassis
Heavy channel 22#, 25#, 28# 220 – 280 9 m / 12 m Trailer and truck frames, machine bases, heavy supports
Large channel 32#, 36#, 40# 320 – 400 12 m Bridge members, gantry frames, heavy industrial structures
Processed channel Any size above, a or b as above cut to drawing Members cut, notched and drilled ready for fabrication

Tolerances

Dimensions, web and flange thickness, straightness and mass follow GB/T 706 for hot-rolled section steel, with the applicable tolerance band stated on the mill certificate and repeated on the order acknowledgement. Channel is more prone to longitudinal bow and flange tilt than a symmetric section, so straightness limits are agreed where the member has to be assembled without straightening.

Available Sizes — Detailed Specification

Every size below has its own page with the full theoretical weight table, tolerances, grade data, applications and delivery options. Theoretical weights are the published values from GB/T 706-2016 Table A.2.

Size Web thickness Weight (kg/m) Specification page
50 × 37 mm 4.5 mm 5.438 Weight & specification
63 × 40 mm 4.8 mm 6.634 Weight & specification
65 × 40 mm 4.3 mm 6.51 Weight & specification
80 × 43 mm 5 mm 8.045 Weight & specification
100 × 48 mm 5.3 mm 10.007 Weight & specification
120 × 53 mm 5.5 mm 12.06 Weight & specification
126 × 53 mm 5.5 mm 12.318 Weight & specification
140 × 58 mm 6 mm 14.535 Weight & specification
140 × 60 mm 8 mm 16.733 Weight & specification
160 × 63 mm 6.5 mm 17.24 Weight & specification
160 × 65 mm 8.5 mm 19.752 Weight & specification
180 × 68 mm 7 mm 20.174 Weight & specification
180 × 70 mm 9 mm 23 Weight & specification
200 × 73 mm 7 mm 22.637 Weight & specification
200 × 75 mm 9 mm 25.777 Weight & specification
220 × 77 mm 7 mm 24.999 Weight & specification
220 × 79 mm 9 mm 28.453 Weight & specification
250 × 78 mm 7 mm 27.41 Weight & specification
250 × 80 mm 9 mm 31.335 Weight & specification
250 × 82 mm 11 mm 35.26 Weight & specification
280 × 82 mm 7.5 mm 31.427 Weight & specification
280 × 84 mm 9.5 mm 35.823 Weight & specification
280 × 86 mm 11.5 mm 40.219 Weight & specification
300 × 85 mm 7.5 mm 34.463 Weight & specification
300 × 87 mm 9.5 mm 39.173 Weight & specification
300 × 89 mm 11.5 mm 43.883 Weight & specification
320 × 88 mm 8 mm 38.083 Weight & specification
320 × 90 mm 10 mm 43.107 Weight & specification
320 × 92 mm 12 mm 48.131 Weight & specification
360 × 96 mm 9 mm 47.814 Weight & specification
360 × 98 mm 11 mm 53.466 Weight & specification
360 × 100 mm 13 mm 59.118 Weight & specification
400 × 100 mm 10.5 mm 58.928 Weight & specification
400 × 102 mm 12.5 mm 65.208 Weight & specification
400 × 104 mm 14.5 mm 71.488 Weight & specification

Steel Grades & International Equivalents

All grades below are supplied with a mill test certificate. The right-hand column shows the material type and the Chinese standard the grade is produced to; the middle columns give the nearest recognised equivalent in other national standards. Exact equivalence for a specific project should be confirmed on the enquiry.

GB (China) ASTM / AISI (US) EN (Europe) JIS (Japan) DIN (Germany) Type / Standard
Q235B A36 / A283 Gr.C S235JR (EN 10025-2) SS400 (JIS G3101) St37-2 Carbon structural steel (GB/T 700)
Q355B A572 Gr.50 / A992 S355JR (EN 10025-2) SM490 (JIS G3106) St52-3 High-strength low-alloy (HSLA) steel (GB/T 1591)
SS400 (JIS) A36 S235JR SS400 St37-2 Carbon structural steel (JIS G3101)

Grade Notes

Chemical Composition (%, ladle analysis)

Typical specification limits. Actual heat values are reported on the mill test certificate supplied with every shipment.

Grade C Si Mn P max S max Other elements
Q235B ≤0.20 ≤0.35 ≤1.40 ≤0.045 ≤0.045 —
Q355B ≤0.24 ≤0.55 ≤1.60 ≤0.035 ≤0.035 Ceq ≤0.45
SS400 (JIS) — — — ≤0.050 ≤0.050 —

Mechanical Properties

Minimum values at room temperature unless stated. ReL = yield strength; Rp0.2 = 0.2% proof stress; Rm = tensile strength; A = elongation after fracture.

Grade Yield (ReL) Proof (Rp0.2) Tensile (Rm) Elongation A Impact / others
Q235B ≥235 MPa — 370–500 MPa ≥26% +20 °C, ≥27 J —
Q355B ≥355 MPa (≤16 mm) — 470–630 MPa ≥22% +20 °C, ≥27 J —
SS400 (JIS) ≥245 MPa — 400–510 MPa ≥21% — —
Channel Steel - production and quality control
Channel Steel — production, handling and quality control.

Standards & Documents

Typical Applications

Industry / Application Typical use
Building frames & purlins Wall and roof purlins, floor beams, lintels, mezzanine framing and secondary steelwork, where the flat back makes bolting to the primary frame simple.
Curtain wall & façade framing Glass and stone curtain wall mullion and transom framing, substructure supports and cladding rails, cut to tight shop lengths.
Vehicle & trailer chassis Truck body frames, trailer chassis rails, tipper body framing and special-purpose vehicle sub-frames, normally in Q355B.
Machinery & equipment frames Conveyor frames, crusher and screen supports, pump and compressor bases and skid frames fabricated by welding.
Crane & monorail tracks Monorail and light crane track beams, trolley rails and runway supports, where the channel web carries the wheel load directly.
Bridge & infrastructure details Bridge parapet supports, expansion joint frames, tunnel bracing and drainage supports, drilled to the fabrication drawing.
Storage racking & shelving Rack uprights, beam sections and work-bench frames, supplied in mill finish or hot-dip galvanized.

Common Problems Buyers Face — and How We Prevent Them

These are the issues that most often cause claims on steel imports. Each one is controlled in our process before shipment.

Longitudinal bow in a long channel

Why it happens: The asymmetric section cools unevenly after rolling and is more prone to bow and flange tilt than a symmetric profile, so a 12 m member can arrive out of line.

Our control: Straightness is agreed at order stage for members that must assemble without straightening, checked at loading against the standard, and the limit is reported on the inspection record. For very straightness-critical work we will advise on an H-beam or a fabricated alternative.

Substituting the a version for the b version

Why it happens: Both have the same nominal height and look similar in a bundle, but the b version has a thicker web and wider flanges, so the section modulus is higher.

Our control: The order acknowledgement and bundle labels state the full designation including the a or b suffix, and the mill certificate gives the actual web and flange thicknesses so the section properties can be checked against the design.

Rust between the flanges before fabrication

Why it happens: Mill-finish channel is shipped with rolling scale, and water can sit inside the channel where it will not drain.

Our control: Material is shipped dry and covered, with VCI paper on long routes. Where the channel is open and exposed, we supply shot-blasted and primed, or hot-dip galvanized channel, which coats the inside of the section as well as the outside.

Distortion when welding a fabricated channel member

Why it happens: A high heat input on one flange of an asymmetric section pulls the member sideways, and the distortion cannot always be taken out afterwards.

Our control: Use a balanced welding sequence and, for heavy-duty welded frames, consider an H-beam or a welded box which is far less prone to asymmetric shrinkage. Tell us the fabrication method at enquiry stage and we will advise on grade and section.

Lengths or holes not matching the drawing

Why it happens: Channel ordered to a nominal length with no agreed end condition or hole positions arrives square cut and unholed.

Our control: Length, length tolerance, end preparation and hole positions are confirmed in writing on the order acknowledgement before production, and the cutting list is attached to the production traveller.

Channel Steel - inspected and packed for shipment
Channel Steel — inspected and packed for shipment.

Our Supply & Manufacturing Advantages

Packaging, Delivery & Payment

Frequently Asked Questions

What is the Chinese equivalent of EN S235JR channel steel?

Q235B to GB/T 700 is the closest Chinese equivalent to S235JR, and it is the grade most often quoted for the European market. For higher strength the equivalent of S355JR is Q355B to GB/T 1591. Both are supplied with a mill test certificate showing chemistry and mechanical properties, so the equivalence can be verified against your drawing.

What is the difference between channel steel and an I-beam?

A channel has two flanges on the same side of the web, so its bending strength is strong about the axis through the web but much weaker about the other axis, and its centroid is offset. An I-beam has flanges on both sides, so it is stronger in bending for the same weight and much better in compression as a column. Use channel for purlins, frames and chassis where its flat back helps, and an I-beam or H-beam for columns and long-span beams.

Should I use the a or the b version of a channel?

Use the b version where the a section is marginal on bending strength or deflection, where the connection needs a wider flange for bolt spacing, or where the member is heavily loaded. The b version has the same nominal height, so it usually avoids going up a size and increasing the depth of the structure.

What is the difference between 5# channel and 40# channel?

The number is the nominal web height in centimetres, so 5# is about 50 mm high and 40# about 400 mm high. The light sizes are used for purlins, framing and light supports, while the heavy sizes carry bridge and heavy industrial loads. The weight per metre rises steeply with the number, so getting the size right is where most of the material cost sits.

Who supplies channel steel from China for export projects?

We supply hot-rolled channel from 5# to 40# in the a and b series, in Q235B, Q355B and SS400, cut and drilled to your cutting list, galvanized on request, with EN 10204 3.1 mill certificates and export packing. Send the section list, the grade and the destination port for a quotation with weights and packing details.

Can channel steel be supplied hot-dip galvanized?

Yes. Channel is a good candidate for galvanizing because the zinc reaches the inside of the section where paint would struggle to cover fully. Coating weight is nominated against the exposure class, and we cut and drill before dipping so the finished member has no bare steel.

Do you have a minimum order quantity?

No strict minimum and one ton can ship, which suits trial orders and small maintenance jobs. For very small quantities the freight cost per ton will dominate the landed price and we will say so rather than quote an uneconomic shipment.

How is channel steel packed for export and what is the lead time?

Channel is bundled with the flanges nested, strapped to container dimensions, or shipped loose in a bulk vessel for large tonnage, with edge protection on the flange tips. Common sizes are dispatched to the port within 3 days, and cut-to-length or galvanized orders take about a week.

What documents are provided with a channel steel shipment?

An EN 10204 3.1 mill test certificate showing heat number, chemical composition and mechanical properties, plus the commercial invoice, packing list, bill of lading and certificate of origin. SGS or BV third-party inspection can be arranged before loading if your project requires it.

Request a Quotation Export Packaging

Live Stock & Indicative Price

The table below lists live stock at the time of publication, with indicative EXW China reference prices in USD per tonne (converted at 6.70 CNY/USD). Steel prices move with the mill market every week — send us your size, quantity and destination and we will confirm availability and issue a firm FOB or CIF quotation.

Product Size / Model Grade Weight / pc Price (USD/t, EXW) Stock (t)
Channel Steel U50 Q235B 18–19 kg $510 1
Channel Steel U50 Q235B 19–20 kg $504 1
Channel Steel U50 Q235B 20–21 kg $504 4
Channel Steel U50 Q235B 21–22 kg $503 1
Channel Steel U50 Q235B 22–23 kg $500 2
Channel Steel U50 Q235B 23kg $496 1
Channel Steel U50 Q235B 24–25 kg $496 2
Channel Steel U50 Q235B 25–26 kg $496 4
Channel Steel U50 Q235B 26–27 kg $496 3
Channel Steel U50 Q235B 27kg $496 1
Channel Steel U50 Q235B 27–28 kg $496 2
Channel Steel U50 Q235B 28kg $496 2
Channel Steel U50 Q235B 29–30 kg $496 1
Channel Steel U63 Q235B 18–19 kg $510 1
Channel Steel U63 Q235B 21–22 kg $497 2
Channel Steel U63 Q235B 23–24 kg $493 1
Channel Steel U63 Q235B 24–25 kg $493 3
Channel Steel U63 Q235B 25–26 kg $493 1
Channel Steel U63 Q235B 26–27 kg $493 2
Channel Steel U63 Q235B 28–29 kg $490 2
Channel Steel U63 Q235B 29–30 kg $490 2
Channel Steel U63 Q235B 30–31 kg $490 1
Channel Steel U63 Q235B 31–32 kg $490 2
Channel Steel U63 Q235B 32–33 kg $490 1
Channel Steel U63 Q235B 33–34 kg $490 3
Channel Steel U63 Q235B 34–35 kg $490 1
Channel Steel U63 Q235B 37kg $490 2
Channel Steel U80 Q235B 23–24 kg $503 1
Channel Steel U80 Q235B 30–31 kg $493 2
Channel Steel U80 Q235B 32–33 kg $490 2
Channel Steel U80 Q235B 34–35 kg $490 2
Channel Steel U80 Q235B 35–36 kg $488 1
Channel Steel U80 Q235B 36–37 kg $487 1
Channel Steel U80 Q235B 38–39 kg $485 4
Channel Steel U80 Q235B 39–40 kg $485 2
Channel Steel U80 Q235B 41–42 kg $485 2
Channel Steel U80 Q235B 42–43 kg $485 2
Channel Steel U80 Q235B 43–44 kg $485 2
Channel Steel U80 Q235B 44–45 kg $485 9
Channel Steel U100 Q235B 20–21 kg $515 3
Channel Steel U100 Q235B 21–22 kg $510 2
Channel Steel U100 Q235B 23–24 kg $509 1
Channel Steel U100 Q235B 24–25 kg $507 3
Channel Steel U100 Q235B 25–26 kg $507 2
Channel Steel U100 Q235B 27–28 kg $507 5
Channel Steel U100 Q235B 29–30 kg $504 1
Channel Steel U100 Q235B 31–32 kg $501 1
Channel Steel U100 Q235B 37–38 kg $494 3
Channel Steel U100 Q235B 41kg $491 2
Channel Steel U100 Q235B 42–43 kg $490 3
Channel Steel U100 Q235B 43kg $490 10
Channel Steel U100 Q235B 44–45 kg $488 3
Channel Steel U100 Q235B 45–46 kg $487 5
Channel Steel U100 Q235B 46–47 kg $487 1
Channel Steel U100 Q235B 50kg $485 8
Channel Steel U100 Q235B 50–51 kg $485 2
Channel Steel U100 Q235B 51–52 kg $485 2
Channel Steel U100 Q235B 53–54 kg $485 1
Channel Steel U100 Q235B 54–55 kg $485 3
Channel Steel U100 Q235B 82–83 kg $485 3
Channel Steel U120 Q235B 31–32 kg $510 2
Channel Steel U120 Q235B 32–33 kg $509 2
Channel Steel U120 Q235B 33–34 kg $504 3
Channel Steel U120 Q235B 34–35 kg $503 1
Channel Steel U120 Q235B 36–37 kg $503 1
Channel Steel U120 Q235B 41–42 kg $499 1
Channel Steel U120 Q235B 43kg $497 3
Channel Steel U120 Q235B 44–45 kg $497 4
Channel Steel U120 Q235B 46–47 kg $493 1
Channel Steel U120 Q235B 50kg $491 3
Channel Steel U120 Q235B 51–52 kg $488 4
Channel Steel U120 Q235B 52–53 kg $487 4
Channel Steel U120 Q235B 56–57 kg $485 2
Channel Steel U120 Q235B 62–63 kg $485 3
Channel Steel U120 Q235B 65–66 kg $485 3
Channel Steel U126 Q235B 66–68 kg $500 3
Channel Steel U140 Q235B 118–120 kg $485 4
Channel Steel U140-B Q235B 135–138 kg $485 3
Channel Steel U140 Q235B 41–42 kg $524 3
Channel Steel U140 Q235B 54–55 kg $503 3
Channel Steel U140 Q235B 56–57 kg $496 2
Channel Steel U140 Q235B 58–59 kg $493 2
Channel Steel U140 Q235B 60–61 kg $491 3
Channel Steel U140 Q235B 62–63 kg $488 2
Channel Steel U140 Q235B 63–64 kg $488 3
Channel Steel U140 Q235B 66–67 kg $485 1
Channel Steel U140 Q235B 70–71 kg $485 2
Channel Steel U140 Q235B 76–77 kg $485 2
Channel Steel U140 Q235B 79–80 kg $485 8
Channel Steel U140 Q235B 80–81 kg $485 1
Channel Steel U140 Q235B 83–84 kg $485 5
Channel Steel U140-B Q235B 90–92 kg $485 1
Channel Steel U160 Q235B 141–143 kg $485 7
Channel Steel U160-B Q235B 160–164 kg $485 1
Channel Steel U160 Q235B 62–63 kg $501 1
Channel Steel U160 Q235B 70–72 kg $491 3
Channel Steel U160 Q235B 72–73 kg $487 1
Channel Steel U160 Q235B 80–82 kg $485 2
Channel Steel U160 Q235B 82–84 kg $485 3
Channel Steel U160 Q235B 94–96 kg $485 5

Showing 100 of 118 listed sizes (lowest prices first). Price range USD 485–524 per tonne (EXW China). MOQ from 1 tonne; stock dispatched to port within 3 days. Mill test certificate (EN 10204 3.1) and third-party inspection available on request.

Related Products